EURAUD Pivot Points Calculator

Daily pivot points turn yesterday's open, high, low and close into today's reference levels for support and resistance — a level many EURAUD traders already watch, not a signal on its own.

How do I calculate pivot points for EURAUD?

Here's a worked example (these figures will differ from whatever this page's own fields currently show, since those update as new price data comes in — the calculation method is what matters): open 1.60470, high 1.63170, low 1.59770, close 1.61920.

With EURAUD closing at 1.61920, that's above the pivot point of 1.61620 — a simple, widely-used read on whether sentiment is leaning bullish or bearish for the session.

What are R1/R2 and S1/S2?

R1 and R2 are resistance levels progressively further above the pivot; S1 and S2 are support levels the same distance below it, using the full prior-period range (high minus low, 0.03400 pips in this example).

Many traders watch price reaction at R1/S1 specifically: a clean break through tends to be read as momentum continuing toward R2/S2, while a rejection back toward the pivot is read as the level holding.

How often should pivot points be recalculated?

At the start of each new trading period — daily for daily pivots, weekly for weekly pivots — using that prior period's own high, low and close. They stay fixed for the entire session rather than moving tick by tick the way a live indicator would.

What pivot points show on EURAUD

It trades in both the Asian and European sessions, with the biggest moves often at the London open. European Central Bank and Reserve Bank of Australia policy, and Chinese demand and commodity prices, drive it.

Pivot points turn the previous period's high, low and close into a central level and a ladder of support and resistance levels around it. Many traders watch them because others do, which makes them a common reference for entries, stops and targets on EURAUD.

Worked example: pivot levels for EURAUD

The previous-day figures are invented for illustration. Assume the previous day's high was 1.6500, the low 1.6340 and the close 1.6440, a range of 0.0160.

• P = (1.6500 + 1.6340 + 1.6440) ÷ 3 = 1.642667.
• R1 = 2 × 1.642667 − 1.6340 = 1.6513.
• S1 = 2 × 1.642667 − 1.6500 = 1.6353.
• R2 = 1.642667 + 0.0160 = 1.6587.
• S2 = 1.642667 − 0.0160 = 1.6267.
• R3 = 1.6500 + 2 × (1.642667 − 1.6340) = 1.6673.
• S3 = 1.6340 − 2 × (1.6500 − 1.642667) = 1.6193.

The levels above are worked from P shown to 6 decimals and rounded to 4, so the calculator, which carries more decimals, may differ from them in the last digit.

A trade plan built from these levels

Suppose price pulls back to the pivot at 1.6427 and you buy, with the stop at S1 and the target at R1.

• Stop distance: 1.6427 − 1.6353 = 0.0074 = 74 pips.
• Target distance: 1.6513 − 1.6427 = 0.0086 = 86 pips.
• Risk per 1.00 lot: 74 × $7.00 = $518.00.
• Lots for a $100 risk: $100 ÷ $518.00 = 0.1931, rounded down to 0.19.
• If the stop is hit: 0.19 × 74 × $7.00 = -$98.42. If the target is hit: 0.19 × 86 × $7.00 = $114.38.
• Reward-to-risk: 86 ÷ 74 = 1.16.

The levels do not guarantee a reaction. They frame where to place orders; if S1 breaks, the next level down, S2 at 1.6267, becomes the reference. Then check the real result with the EURAUD risk reward ratio calculator before you enter.

Reading price against the pivot

The same levels give a simple map of the session. Distances below are measured from P at 1.6427, with the value of each move for one lot at $7.00 per pip:

• Above P: price holding above 1.6427 favours buyers, with R1 at 1.6513 (86 pips, $602.00 per lot) as the first target.
• Through R1: the next reference is R2 at 1.6587, 160 pips above P, worth $1,120.00 per lot.
• Below P: price holding under 1.6427 favours sellers, with S1 at 1.6353 (74 pips, $518.00 per lot) as the first target.
• Through S1: the next reference is S2 at 1.6267, 160 pips below P, worth $1,120.00 per lot.

Price that spends the whole session between S1 and R1 has stayed inside the central band, which often means a quiet day on EURAUD. A move to R2 or S2 usually needs news or a strong trend behind it.

Limits of pivot points

• The forex market runs around the clock on weekdays, so "yesterday" means the daily candle your broker draws, and brokers place the daily cutoff at different server times.
• Pivots come only from three prices, so one spike in the high or low shifts every level.
• They suit intraday decisions best; for swing trades, weekly or monthly inputs give wider levels.
• Price often ignores a level, so treat them as areas, not exact lines.

Verify the EURAUD levels with your broker

The classic formulas above are standard, but the high, low and close you enter must come from your own platform's daily candle, because brokers use different server times and price feeds. The values of $7.00 per pip per lot are reference figures, so check the contract specification before sizing a trade. For the method's background, see pivot points on Wikipedia.

More tools for EURAUD

• Turn a risk amount and a stop distance into a lot size with the EURAUD lot size calculator.
• See how much margin that position ties up with the EURAUD margin calculator.
• Check what one pip is worth per lot with the EURAUD pip value calculator.
• Work out the result of a finished trade with the EURAUD profit and loss calculator.
• Compare risk and reward before entering with the EURAUD risk reward ratio calculator.
• Compare a similar instrument: AUDUSD pivot points calculator.
• Compare a similar instrument: EURNZD pivot points calculator.

Conclusion

These levels are a reference derived from the prior period's range, not a forecast — confirm your own platform's actual prior-period OHLC for EURAUD if you're trading these levels for real, since this page's worked example is illustrative, not a live feed. See what a pivot point is and how traders use it, and Wikipedia's entry on pivot points for the underlying method and its variants.

Frequently asked questions