DJ30 Pivot Points Calculator

Daily pivot points turn yesterday's open, high, low and close into today's reference levels for support and resistance — a level many DJ30 traders already watch, not a signal on its own.

How do I calculate pivot points for DJ30?

Here's a worked example (these figures will differ from whatever this page's own fields currently show, since those update as new price data comes in — the calculation method is what matters): open 51,111.65, high 51,381.65, low 51,041.65, close 51,256.65.

With DJ30 closing at 51,256.65, that's above the pivot point of 51,226.65 — a simple, widely-used read on whether sentiment is leaning bullish or bearish for the session.

What are R1/R2 and S1/S2?

R1 and R2 are resistance levels progressively further above the pivot; S1 and S2 are support levels the same distance below it, using the full prior-period range (high minus low, 340.00 points in this example).

Many traders watch price reaction at R1/S1 specifically: a clean break through tends to be read as momentum continuing toward R2/S2, while a rejection back toward the pivot is read as the level holding.

How often should pivot points be recalculated?

At the start of each new trading period — daily for daily pivots, weekly for weekly pivots — using that prior period's own high, low and close. They stay fixed for the entire session rather than moving tick by tick the way a live indicator would.

What pivot points show on DJ30

The cash market trades during New York hours, while CFD brokers usually quote it for almost 24 hours on weekdays, with the most liquidity around the New York open. US earnings from its 30 members, Federal Reserve decisions and US economic data drive it.

Pivot points turn the previous period's high, low and close into a central level and a ladder of support and resistance levels around it. Many traders watch them because others do, which makes them a common reference for entries, stops and targets on DJ30.

Worked example: pivot levels for DJ30

The previous-day figures are invented for illustration. Assume the previous day's high was 50,400.0, the low 49,700.0 and the close 50,250.0, a range of 700.0.

• P = (50,400.0 + 49,700.0 + 50,250.0) ÷ 3 = 50,116.667.
• R1 = 2 × 50,116.667 − 49,700.0 = 50,533.3.
• S1 = 2 × 50,116.667 − 50,400.0 = 49,833.3.
• R2 = 50,116.667 + 700.0 = 50,816.7.
• S2 = 50,116.667 − 700.0 = 49,416.7.
• R3 = 50,400.0 + 2 × (50,116.667 − 49,700.0) = 51,233.3.
• S3 = 49,700.0 − 2 × (50,400.0 − 50,116.667) = 49,133.3.

The levels above are worked from P shown to 3 decimals and rounded to 1, so the calculator, which carries more decimals, may differ from them in the last digit.

A trade plan built from these levels

Suppose price pulls back to the pivot at 50,116.7 and you buy, with the stop at S1 and the target at R1.

• Stop distance: 50,116.7 − 49,833.3 = 283.4 = 283 points.
• Target distance: 50,533.3 − 50,116.7 = 416.6 = 417 points.
• Risk per 1.00 lot: 283 × $1.00 = $283.00.
• Lots for a $100 risk: $100 ÷ $283.00 = 0.3534, rounded down to 0.35.
• If the stop is hit: 0.35 × 283 × $1.00 = -$99.05. If the target is hit: 0.35 × 417 × $1.00 = $145.95.
• Reward-to-risk: 417 ÷ 283 = 1.47.

The levels do not guarantee a reaction. They frame where to place orders; if S1 breaks, the next level down, S2 at 49,416.7, becomes the reference. Then check the real result with the DJ30 risk reward ratio calculator before you enter.

Reading price against the pivot

The same levels give a simple map of the session. Distances below are measured from P at 50,116.7, with the value of each move for one lot at $1.00 per point:

• Above P: price holding above 50,116.7 favours buyers, with R1 at 50,533.3 (417 points, $417.00 per lot) as the first target.
• Through R1: the next reference is R2 at 50,816.7, 700 points above P, worth $700.00 per lot.
• Below P: price holding under 50,116.7 favours sellers, with S1 at 49,833.3 (283 points, $283.00 per lot) as the first target.
• Through S1: the next reference is S2 at 49,416.7, 700 points below P, worth $700.00 per lot.

Price that spends the whole session between S1 and R1 has stayed inside the central band, which often means a quiet day on DJ30. A move to R2 or S2 usually needs news or a strong trend behind it.

Limits of pivot points

• Because this market has a defined session, the previous high, low and close depend on which hours your broker includes, so levels can differ slightly between platforms.
• Pivots come only from three prices, so one spike in the high or low shifts every level.
• They suit intraday decisions best; for swing trades, weekly or monthly inputs give wider levels.
• Price often ignores a level, so treat them as areas, not exact lines.

Verify the DJ30 levels with your broker

The classic formulas above are standard, but the high, low and close you enter must come from your own platform's daily candle, because brokers use different server times and price feeds. The values of $1.00 per point per lot are reference figures, so check the contract specification before sizing a trade. For the method's background, see pivot points on Wikipedia.

More tools for DJ30

• Turn a risk amount and a stop distance into a lot size with the DJ30 lot size calculator.
• See how much margin that position ties up with the DJ30 margin calculator.
• Check what one point is worth per lot with the DJ30 pip value calculator.
• Work out the result of a finished trade with the DJ30 profit and loss calculator.
• Compare risk and reward before entering with the DJ30 risk reward ratio calculator.
• Compare a similar instrument: SP500 pivot points calculator.
• Compare a similar instrument: NAS100 pivot points calculator.

Conclusion

These levels are a reference derived from the prior period's range, not a forecast — confirm your own platform's actual prior-period OHLC for DJ30 if you're trading these levels for real, since this page's worked example is illustrative, not a live feed. See what a pivot point is and how traders use it, and Wikipedia's entry on pivot points for the underlying method and its variants.

Frequently asked questions