EURCHF Lot Size Calculator
Forex
EURCHF is a currency pair — this calculator uses its own real contract size and point value rather than a one-size-fits-all forex formula, since pip value and typical price steps vary a lot between instrument types.
How do I calculate lot size for EURCHF?
Say a trader has a $10,000 account and decides to risk 2% of it on a EURCHF short (sell) at 0.94656, with a stop 38 pips away at 0.95036.
Rounded to a size a broker will actually accept, that's 0.44 lots — a $200.71 loss if the stop is hit.
Using the same 38-pip stop, here's how that scales at two common risk levels on a $10,000 account:
- Conservative (1% risk): $100.00 at risk, 0.22 lots
- Balanced (2% risk): $200.00 at risk, 0.44 lots
These are illustrative figures at a fixed example balance and stop — the calculator above uses live prices and your own real inputs. The percentage-risk model itself follows the position-sizing approach popularized by Van Tharp in Trade Your Way to Financial Freedom, among the most widely cited references for treating position sizing as its own risk-management discipline.
What is a standard, mini, and micro lot on EURCHF?
A standard lot is 100,000 units of the base currency, a mini lot is one tenth of that, and a micro lot is one hundredth. Each step down scales the dollar value of a pip move down by the same factor, which is useful for fine-tuning a position to an exact risk amount rather than rounding to a full lot.
When should I adjust my lot size for EURCHF?
Consider sizing down around high-impact news events or major session overlaps, when volatility and slippage risk increase — a stop that normally holds can be jumped past entirely in a fast move. That risk is higher for this instrument than for a typically calmer major forex pair.
What drives EURCHF and how that shapes your lot size
EUR/CHF is the euro priced in Swiss francs, usually one of the quietest cross pairs. Swiss National Bank policy and eurozone risk sentiment drive it. It is most active in the London session.
In January 2015 the Swiss National Bank abandoned its 1.20 floor under this pair without warning, and the price fell by several thousand pips within minutes; stops can fill far from where you set them in a shock like that. Daily ranges are small, so stops of 10 to 20 pips are common, but position size should still allow for gap risk.
Worked example: sizing a EURCHF buy on a $10,000 account
The figures below are invented for illustration and use a rounded reference price, not a live quote. Assume a $10,000 account risking 1% on one buy trade with a stop 20 pips below the entry.
- Risk amount: $10,000 × 1% = $100.00.
- Entry 0.9545, stop 0.9525: the distance is 0.0020 in price, which is 20 pips (distance ÷ 0.0001).
- Value of one pip: 0.0001 × 100,000 = 10 CHF per pip for 1 lot; assuming USDCHF = 0.8300 (1 CHF = 1 ÷ 0.8300 = $1.204819), that is $12.05.
- Risk per 1.00 lot: 20 × $12.05 = $241.00.
- Lots before rounding: $100.00 ÷ $241.00 = 0.4149.
- Rounded down to the 0.01 lot step: 0.41 lots.
- Check: 0.41 × 20 × $12.05 = $98.81, inside the $100 budget.
If price reaches the stop, the loss is $98.81, about 0.99% of the account. A target twice as far away, at 0.9585 (40 pips), would pay 0.41 × 40 × $12.05 = $197.62. If you widen the stop to 40 pips, the same $100 budget gives 0.20 lots, because lot size shrinks as the stop widens.
Margin check and effective leverage for this EURCHF trade
- Position value: 0.41 lot × 100,000 contract = 41,000 EUR; assuming EURUSD = 1.1500, the position is worth $47,150.
- Margin at 1:100 (1%): $47,150 × 1% = $471.50.
- Effective leverage: $47,150 ÷ $10,000 = 4.7×.
The leverage ceiling your broker allows did not enter the lot-size calculation at all. The risk amount and the stop distance set the size, and leverage only decides how much margin that size locks up. The EURCHF margin calculator shows how that requirement changes with your own leverage.
Common EURCHF sizing mistakes
- Copying a lot size from another instrument. One pip on EURCHF is worth $12.05 per lot here, so a 20 pip stop risks $241.00 per lot; a pair or index with a different value per pip would risk a different amount for the same count.
- Miscounting the pip. In January 2015 the Swiss National Bank abandoned its 1.20 floor under this pair without warning, and the price fell by several thousand pips within minutes; stops can fill far from where you set them in a shock like that.
- Ignoring the spread. Because pips are small relative to the spread on some brokers, check the spread against your stop distance before entering.
- Rounding up. Adding even one 0.01 lot step (0.42 lots) would risk $101.22, above the $100 you set.
Verify EURCHF against your broker before trading
This page starts from a contract size of 100,000 and a value of $12.05 per pip per lot, which are reference values. Brokers differ, so open the contract specification for EURCHF in your platform and confirm the contract size, the minimum and maximum volume, and the lot step before you rely on any lot size. A wrong contract size is the most common reason a calculated size is rejected or risks more than expected. For background on the instrument, see the Swiss National Bank on Wikipedia, and for the leverage concept see leverage in finance.
More tools for EURCHF
- See how much margin that position ties up with the EURCHF margin calculator.
- Check what one pip is worth per lot with the EURCHF pip value calculator.
- Work out the result of a finished trade with the EURCHF profit and loss calculator.
- Compare risk and reward before entering with the EURCHF risk reward ratio calculator.
- Mark support and resistance from yesterday's range with the EURCHF pivot points calculator.
- Compare a similar instrument: USDCHF lot size calculator.
- Compare a similar instrument: EURUSD lot size calculator.
Conclusion
This math only holds if 100,000 units per lot and $12.00 per pip are actually your own broker's real numbers for EURCHF — every broker can quote contract specifications slightly differently. Always confirm your own platform's EURCHF specification (right-click the symbol in Market Watch, then Specification) before trusting a suggested lot size for a real trade. See how lot size is calculated step-by-step for the general method, Wikipedia's entry on contracts for difference for how brokers structure these contracts, and real MT4 order-ticket screenshots at different leverage settings for further reading.
Contract specification
Point value and minimum lot step vary by broker on index/CFD instruments — a mismatch here is a common, avoidable cause of an unexpectedly large loss. Confirm this instrument's contract specification in your platform before sizing a real trade.
Frequently asked questions
Can I risk the same percentage on every instrument?
Yes, the risk percentage itself is a decision about your account and stays consistent — what changes between instruments is point value and typical volatility.
Is lot size the same as position size?
Yes — on this site the two terms are used interchangeably; both mean the number of lots to trade.
Does leverage change the EURCHF lot size I should trade?
No. Position size comes from your risk amount and your stop distance; leverage only caps how large a position you are allowed to open. In the example above a 1:100 account locks up $471.50 of margin for a $47,150 EURCHF position, an effective leverage of 4.7×, while the lot size was set entirely by the $100 risk and the 20 pip stop.
How many lots of EURCHF can I trade with $1,000 and 2% risk?
With a $1,000 account risking 2% ($20) and the same 20 pip stop, the risk per lot is $241.00, so $20.00 ÷ $241.00 = 0.0830 lots, which rounds down to 0.08 lots.
What stop distance is typical for EURCHF?
Daily ranges are small, so stops of 10 to 20 pips are common, but position size should still allow for gap risk. At $12.05 per pip per lot, each extra pip of stop distance adds that amount of risk for every lot you trade, which is why a wider stop always means a smaller lot size.