CADCHF Lot Size Calculator

Forex
CADCHF Lot Size Calculator
i
$0
$0
Suggested lots? —
Units (trade size)i —
Risk amount
—
Required margin
—
Stop distance
—
Reward : Risk
—
Free margin left
—
Written by Frano Grgić
Published September 29, 2026 · How we verify this · Not financial advice
Was this calculator helpful?
No email needed. We read every comment.

CADCHF is a currency pair — this calculator uses its own real contract size and point value rather than a one-size-fits-all forex formula, since pip value and typical price steps vary a lot between instrument types.

How do I calculate lot size for CADCHF?

Say a trader has a $10,000 account and decides to risk 2% of it on a CADCHF short (sell) at 0.58732, with a stop 23 pips away at 0.58962.

Lots = Risk amount / (Stop distance x Point value)
= $200.00 / (23 x $12.00)
= $200.00 / $276.07
= 0.7245 lots

Rounded to a size a broker will actually accept, that's 0.72 lots — a $198.77 loss if the stop is hit.

Using the same 23-pip stop, here's how that scales at two common risk levels on a $10,000 account:

  • Conservative (1% risk): $100.00 at risk, 0.36 lots
  • Balanced (2% risk): $200.00 at risk, 0.72 lots

These are illustrative figures at a fixed example balance and stop — the calculator above uses live prices and your own real inputs. The percentage-risk model itself follows the position-sizing approach popularized by Van Tharp in Trade Your Way to Financial Freedom, among the most widely cited references for treating position sizing as its own risk-management discipline.

What is a standard, mini, and micro lot on CADCHF?

A standard lot is 100,000 units of the base currency, a mini lot is one tenth of that, and a micro lot is one hundredth. Each step down scales the dollar value of a pip move down by the same factor, which is useful for fine-tuning a position to an exact risk amount rather than rounding to a full lot.

When should I adjust my lot size for CADCHF?

Consider sizing down around high-impact news events or major session overlaps, when volatility and slippage risk increase — a stop that normally holds can be jumped past entirely in a fast move. That risk is higher for this instrument than for a typically calmer major forex pair.

What drives CADCHF and how that shapes your lot size

CAD/CHF is the Canadian dollar priced in Swiss francs, pairing an oil-linked currency with a safe-haven one. Crude-oil prices, Bank of Canada and Swiss National Bank policy, and risk sentiment drive it. It is most active in the London and New York sessions.

The price is below 1, so a pip is a slightly larger share of the price than on EUR/USD, and the pip is worth francs converted to dollars. Stops of 20 to 35 pips are common.

Worked example: sizing a CADCHF buy on a $10,000 account

The figures below are invented for illustration and use a rounded reference price, not a live quote. Assume a $10,000 account risking 1% on one buy trade with a stop 25 pips below the entry.

  • Risk amount: $10,000 × 1% = $100.00.
  • Entry 0.5845, stop 0.5820: the distance is 0.0025 in price, which is 25 pips (distance ÷ 0.0001).
  • Value of one pip: 0.0001 × 100,000 = 10 CHF per pip for 1 lot; assuming USDCHF = 0.8300 (1 CHF = 1 ÷ 0.8300 = $1.204819), that is $12.05.
  • Risk per 1.00 lot: 25 × $12.05 = $301.25.
  • Lots before rounding: $100.00 ÷ $301.25 = 0.3320.
  • Rounded down to the 0.01 lot step: 0.33 lots.
  • Check: 0.33 × 25 × $12.05 = $99.41, inside the $100 budget.

If price reaches the stop, the loss is $99.41, about 0.99% of the account. A target twice as far away, at 0.5895 (50 pips), would pay 0.33 × 50 × $12.05 = $198.83. If you widen the stop to 50 pips, the same $100 budget gives 0.16 lots, because lot size shrinks as the stop widens.

Margin check and effective leverage for this CADCHF trade

  • Position value: 0.33 lot × 100,000 contract = 33,000 CAD; assuming USDCAD = 1.4200, the position is worth $23,239.
  • Margin at 1:100 (1%): $23,239 × 1% = $232.39.
  • Effective leverage: $23,239 ÷ $10,000 = 2.3×.

The leverage ceiling your broker allows did not enter the lot-size calculation at all. The risk amount and the stop distance set the size, and leverage only decides how much margin that size locks up. The CADCHF margin calculator shows how that requirement changes with your own leverage.

Common CADCHF sizing mistakes

  • Copying a lot size from another instrument. One pip on CADCHF is worth $12.05 per lot here, so a 25 pip stop risks $301.25 per lot; a pair or index with a different value per pip would risk a different amount for the same count.
  • Miscounting the pip. The price is below 1, so a pip is a slightly larger share of the price than on EUR/USD, and the pip is worth francs converted to dollars.
  • Ignoring the spread. Spreads are wider than on majors.
  • Rounding up. Adding even one 0.01 lot step (0.34 lots) would risk $102.43, above the $100 you set.

Verify CADCHF against your broker before trading

This page starts from a contract size of 100,000 and a value of $12.05 per pip per lot, which are reference values. Brokers differ, so open the contract specification for CADCHF in your platform and confirm the contract size, the minimum and maximum volume, and the lot step before you rely on any lot size. A wrong contract size is the most common reason a calculated size is rejected or risks more than expected. For background on the instrument, see the Swiss franc on Wikipedia, and for the leverage concept see leverage in finance.

More tools for CADCHF

Conclusion

This math only holds if 100,000 units per lot and $12.00 per pip are actually your own broker's real numbers for CADCHF — every broker can quote contract specifications slightly differently. Always confirm your own platform's CADCHF specification (right-click the symbol in Market Watch, then Specification) before trusting a suggested lot size for a real trade. See how lot size is calculated step-by-step for the general method, Wikipedia's entry on contracts for difference for how brokers structure these contracts, and real MT4 order-ticket screenshots at different leverage settings for further reading.

Contract specification

Pip / point size0.0001
Contract size (units per 1.0 lot)100000
Point value (per 1.0 lot)$12.003073
Margin required (per 1.0 lot)1%
⚠
Verify against your own broker

Point value and minimum lot step vary by broker on index/CFD instruments — a mismatch here is a common, avoidable cause of an unexpectedly large loss. Confirm this instrument's contract specification in your platform before sizing a real trade.

Frequently asked questions

Can I risk the same percentage on every instrument?

Yes, the risk percentage itself is a decision about your account and stays consistent — what changes between instruments is point value and typical volatility.

Is lot size the same as position size?

Yes — on this site the two terms are used interchangeably; both mean the number of lots to trade.

Does leverage change the CADCHF lot size I should trade?

No. Position size comes from your risk amount and your stop distance; leverage only caps how large a position you are allowed to open. In the example above a 1:100 account locks up $232.39 of margin for a $23,239 CADCHF position, an effective leverage of 2.3×, while the lot size was set entirely by the $100 risk and the 25 pip stop.

How many lots of CADCHF can I trade with $1,000 and 2% risk?

With a $1,000 account risking 2% ($20) and the same 25 pip stop, the risk per lot is $301.25, so $20.00 ÷ $301.25 = 0.0664 lots, which rounds down to 0.06 lots.

What stop distance is typical for CADCHF?

Stops of 20 to 35 pips are common. At $12.05 per pip per lot, each extra pip of stop distance adds that amount of risk for every lot you trade, which is why a wider stop always means a smaller lot size.

Get this forex widget for your site

Customise and get code
<script src="https://calculatorsforex.com/embed.js" data-widget="cadchf-lot-size-calculator"></script>

Related calculators